|
 CLICK HERE FOR EXAMPLE
Type: FLUSHUNG
Door & Panels: Doors and Panels shall be 1" thick insulated with a sound deadening honeycomb core. Face
plates shall be not less than 22 gauge bonderized-galvanized steel and shall have a molding interlocking all edges. Door edges shall be welded at intervals around perimeter to insure a rigid unit. Corners shall be
welded and ground smooth. Panels available in 20 gauge.
Pilasters: Pilasters shall be 1-1/4" constructed of 18 gauge bonderized-galvanized steel insulated with a
sound deadening double faced honeycomb core. Edges shall be welded at intervals around perimeter to insure a rigid unit. Edges to be interlocked with molding, corners to be welded and ground smooth.
Hardware: Compartment is to be complete with all hardware and fastenings for a complete installation.
Hardware to include wrap around door hinges, latch, stop and keeper and coat hook. Lower hinge to be recessed in the door and shall operate on opposing nylon cams. Upper hinge to be recessed in the door and
shall operate on a pin anchored above and below the hinge bracket. Latch to be concealed type with emergency access features. All hardware to be Zamac chrome plated.
Fittings: Wall and U brackets to be chrome plated. Door strikes and hinges to be fastened by means of
"one-way" head tamper proof chrome plated sex bolts. All other screws to be Philips Head chrome plated. All
pilasters to have a 3" high stainless steel shoe. Brass and stainless steel hardware available at additional cost.
Finish: Partitions shall be cleaned and finish shall consist of highest quality powder coating baked at 350° F to insure a smooth protective finish.
Color: As selected from color guide.
*Custom colors available at additional cost.
 CLICK HERE FOR EXAMPLE
Type: FLUSHUNG
Door & Panels: Door & Panels shall be constructed of a sandwich of laminated plastic bonded under
pressure to a solid particle board core with the highest quality adhesive assuring a rigid, permanent bond. Doors and Panels – Finish thickness 1".
Pilasters: Shall be secured to the overhead members (by others) by means of a 3/8" x 1" steel bar
mechanically fastened to top of pilasters. Pilaster stud bolts shall be furnished to suit field conditions. Pilasters shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particle
board core Pilaster shall be 1-1/4" thick.
Hardware: All hardware shall be heavy nonferrous chrome plated castings. Fastenings by means of thru-bolts
with theft proof heads. Pilaster shoe shall be 4" high, of #302, 18-8 polished stainless steel. Includes all necessary hardware and fittings for a complete installation. Brass and Stainless Steel hardware available at
additional cost.
Surfacing: All faces and edges shall be 1/16" general purpose laminated plastic. All in accordance with NEMA standards.
Finish: Laminated plastic shall be as selected from Flush-Metal's standard plastic colors and patterns.
Color: As selected from color guide.
 CLICK HERE FOR EXAMPLE
Type: FLUSHUNG
Door & Panels: Door & Panels shall be 1" thick insulated with a honeycomb core. Face plates shall be not
less than 22 gauge stainless steel and shall have a molding interlocking all edges. Door edges shall be welded at intervals around perimeter to insure a rigid unit. Corners shall be welded and ground smooth.
Panels available in 20 gauge.
Pilasters: Pilasters shall be 1-1/4" constructed of 20 gauge stainless steel insulated with a sound deadening
honeycomb core. Edges shall be welded at intervals around perimeter to insure a rigid unit. Edges to be interlocked with oval molding, corners to be welded and ground smooth. Pilasters to be fastened to structural
members with 3/8" cadmium plated rods. Template to be supplied by manufacturer for drilling of structural members..
Hardware: Compartment is to be complete with all hardware and fastenings for a complete installation.
Hardware to include wrap around door hinges, latch, stop and keeper and coat hook. Lower hinge to be recessed in the door and shall operate on opposing nylon cams. Upper hinge shall operate on a pin anchored
above and below the hinge bracket. Latch to be concealed type with emergency access features. All hardware to be Zamac chrome plated.
Fittings: Wall and U brackets to be chrome plated. Door strikes and hinges to be fastened by means of
"one-way" head tamper proof chrome plated sex bolts. All other screws to be Philips Head chrome plated. All
pilasters to have a 3" high stainless steel shoe. Brass and Stainless Steel hardware available at additional cost.
Finish: All stainless steel units shall be #4 finish and shall be vinyl covered for protection during shipment and installation.
Color: Finish shall be #304 stainless steel, #4 finish.
 CLICK HERE FOR EXAMPLE
Type: FLUSHUNG
Door & Panels: Doors shall be a minimum 3/4" thick solid phenolic core with high pressure melamine matte
finish surface made as an integral part of the core material. Laminated surfaces are unacceptable. All edges are to be machined smooth. Panels shall be minimum 1/2" thick solid phenolic core with high pressure
melamine matte finish surface made as an integral part of the core material. Laminated surfaces are unacceptable. All edges are to be machined smooth.
Pilasters: Shall be secured to the overhead members (by others) by means of a 3/8" x 1" steel bar
mechanically fastened to top of pilasters. Pilaster stud bolts shall be furnished to suit field conditions. Pilasters Shall be a minimum 3/4" thick solid phenolic core with high pressure melamine matte finish surface
made as an integral part of the core material. Laminated surfaces are unacceptable. All edges are to be machined smooth and shall be solid black in color.
Hardware: All hardware shall be heavy nonferrous chrome plated castings. Fastenings by means of thru-bolts
with tamper proof heads. Pilaster shoe shall be 3" high, of #302, 18-8 polished stainless steel. Includes all necessary hardware and fittings for a complete installation. Brass and Stainless Steel hardware available at
additional cost.
Finish: Finish shall be matte finish of manufacturer's standard high pressure melamine color.
Color: Finish shall be laminated plastic as selected from Flush-Metal's standard plastic colors and patterns.
BACK TO TOP OF PAGE
|
