|
WT WEDGE TYPE*
Panels shall be 20 gauge stainless steel or 20 gauge bonderized-galvanized steel as
specified. Panels shall have a top and bottom cap. Front of panel shall have oval locking strip connected to top and bottom cap. Panel shall be insulated with a honeycomb core cemented to panel sheets. Surface of
screen at wall shall be 5" wide and shall be mounted to wall with concealed anchorage and without any exposed tastenings.
FS FLOOR SUPPORTED
Panels shall be same construction as standard Flush Metal panels. Panel shall be
attached to pilaster and wall with diecast chrome plated brackets Pilaster shall be 1 1/4" thick made of bonderized-galvanized steel. Pilaster shall have a 3" high stainless steel cover shoe.
PS POST SUPPORTED
Same as Floor Supported except it is applicable for screens up to 26" deep and
will have a supporting post 1 3/4" square.
WH WALL HUNG
Panels shall be same construction as standard Flush Metal panels. Panel shall be attached
to wall with diecast chrome plated wall brackets.
WH-G WALL HUNG GOVERNMENT SCREEN
This type of screen is specified by the Corps of Engineers and General
Services Administration. Panels shall be same construction as standard Flush Metal panels. Panels to have integrally formed mounting flanges. Screens available in baked enamel, stainless steel, plastic laminate
and phenolic.
*WT Screen and WH-G Government screen not available in plastic laminate or phenolic
|
